HF-500N Digital Force Gauge Push and Pull Dynamometer Portable Tester High Precision LCD Measuring Instruments Thrust Pressure Meter (HF-500N)

Regular price $129.99

5 Testing Modes and 3 Display Method: N(Newton),Kg (Kilogram) and Lb (Pound) three measuring units for selection and conversion

Peak Value Maintaining: Maintain the display of peak value until manualzero clearing, can set up automatic PEAK time,from 1-9999 seconds

Data Storage and Output Function: 447 testing values can be stored, The data can be input into computer through data line for various analyses

Easy Reading: 6 digits large screen display, High precision and high resolution

Chargeable Power Supply: The charging voltage is available from 100V to 240V, which can accommodate most areas in domestic and at abroad, It has also protection functions for short circuit, leakage and overload

The digital force gauge with compact size, high accuracy, they are easy to operate and handy to carry out. Widely applied in electron, high &low voltage electrical appliance, hardware, automobile parts, lighter and ignition system, light industry, mechanical, textile, and so on in 10 minutes.rt the automatic shutdown is set to O,the instrument will not shutindustries for testing of pull or push ioad test, insertion force or pull and destructive experiment. This digital orce gauge is new generation pulls the pressure measurinq instrument.
1)Capacity: 500N / 50Kg / 110lb; 
2)Min unit: 0.1N / 0.01kg / 0.01lb; 
3)Value error: 0.5%; 
4)Units: N, Kgf, LBf; 
5)Sampling speed:About 10Hz/s; 
6)Work temperature / Humidity: 0C to 40C, 15 to 80%; 
7)Power Supply: 110 to 220V AC battery charger or battery operation (Nickel battery 6V/1500mAh); 
8)Work environment: No vibrancy and corrosion; 
9)Accessories: Pull clamps / Push clamp / Prolong stick / Mounting screws / english user manual / Carrying case / 110 to 220V Battery charger / PC software and serial interface cable.

Low battery detection shoutdown, when the battery is running low, the instrument will automatically put-off, it can prevent the low battery caused by Inaccurate measurement.The device will automatically stop if no operation with down.